Top 10 Best Liquid Flux For Ps3 [2022]

56948 reviews were considered when writing our recommendations for the in this article.
NoProductScoreAction
1Chip Quik CQ4LF Liquid Flux No-Clean in 10ml (0.34oz) Pen w/tip9.8Buy On Amazon
2PS3 Controller 2 Pack Wireless Motion Sense Dual Vibration Upgraded Gaming Controller for Sony Playstation 3 with Charging Cord9.4Buy On Amazon
3Aquiflux Self Pickling Flux for Precious Metals Gold Silver Jewelry and Hard Soldering 8 Oz (Half Pint)9.2Buy On Amazon
4Kester 1544 Liquid Soldering Flux9.2Buy On Amazon
5CS-FLUX reballing Low viscosity Halogen-free liquid flux for BGA component rework reflow 5g Ideal for VGA GPU repairs8.8Buy On Amazon
6Harris Stay-Clean Liquid Soldering Flux 16 Ounce Bottle (For All Metals Except Aluminum, Magnesium And Titanium)8.8Buy On Amazon
750 ml. CIRCUITWORKS CW3220 Lead-Free Non-corrosive Soldering FLUX/NO CLEAN8.6Buy On Amazon
8Playstation 3 PS3 Slim YLOD Shims Fix Repair Kit Thermal Paste Kester 951 Flux Tamper Security T8 & T10 torx screwdrivers8.4Buy On Amazon
9SRA Soldering Products Rosin Paste Flux #135 In A 2 oz Jar8.2Buy On Amazon
10Chipquik Tack Flux no clean in a 10cc syringe w/plunger & tip - SMD2918.2Buy On Amazon
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.

1. Chip Quik CQ4LF Liquid Flux No-Clean in 10ml (0.34oz) Pen w/tip

  • Lead-Free / RoHS Compliant

2. PS3 Controller 2 Pack Wireless Motion Sense Dual Vibration Upgraded Gaming Controller for Sony Playstation 3 with Charging Cord

  • DESIGNED FOR PlayStation 3 – High Performance Bluetooth PS3 PS2 Wireless controller.
  • DUALVIBRATION and SIXAXIS – These Wireless PS3 gamepad with 2 electronic motors make the each hit, crash and explosion more exciting and realistic.
  • RECHARGEABLE BATTERY- Kujian PS3 Joystick has 450mAh High-capacity Lithium Rechargeable Battery, USB Charger cable charging, Support hours of comfortable game playing.
  • ERGONOMIC SHAPE – High Sensibility and Accuracy Buttons fit to fingers and make your hand comfortable for long time playing.
  • SATISFACTION GUARANTEED: 3 Months Money Back Guaranteed and permanent software update service.

3. Aquiflux Self Pickling Flux for Precious Metals Gold Silver Jewelry and Hard Soldering 8 Oz (Half Pint)

  • Includes: one half-pint (8 fluid ounces within a spray bottle)
  • Yellow-green and self-pickling, it is the best in water-based fluxes
  • Well-mixed to eliminate suspension
  • Use this hard flux on Gold, Silver, Platinum, and other metals with high melting point
  • The benefit of liquid flux is that its transparency will let you see the solder joint more clearly when soldering and the liquid flows better in joints than a paste.

4. Kester 1544 Liquid Soldering Flux

  • Kester 1544 Liquid Flux Repackaged by CML Supply in this convenient dispensing bottle
  • Lead Free – RoHS compliant.
  • Compatible with Lead and Lead-Free Solders
  • 2-ounce bottle
  • Activated Rosin Formula

5. CS-FLUX reballing Low viscosity Halogen-free liquid flux for BGA component rework reflow 5g Ideal for VGA GPU repairs

  • CS-FLUX when heated at around 150 degrees (Celsius) turns into liquid and covers the small gap between the BGA component and the PCB complitelly.
  • CS-FLUX is no clean flux and causes no corrosion if not cleaned, but if needed it can be cleaned very easily with alcohol.
  • Thank’s to it’s liquid nature, a very small amount of CS-FLUX is needed for each repair resulting in a much cleaner work enviroment.
  • CS-FLUX is very sticky and specially designed to keep the solder balls inside the stencil durring the reballing proccess.
  • CS-FLUX is produced in EU (Greece).

6. Harris Stay-Clean Liquid Soldering Flux 16 Ounce Bottle (For All Metals Except Aluminum, Magnesium And Titanium)

7. 50 ml. CIRCUITWORKS CW3220 Lead-Free Non-corrosive Soldering FLUX/NO CLEAN

  • CIRCUITWORKS CW3220 ROSIN SOLDERING FLUX

8. Playstation 3 PS3 Slim YLOD Shims Fix Repair Kit Thermal Paste Kester 951 Flux Tamper Security T8 & T10 torx screwdrivers

  • Shims are used between the CPU/GPU and heatsinks to provide better cooling for your PS3
  • Shims are 42MM X 42MM and are 1.2MM thick
  • 100% copper, cut and polished
  • Contents = 2 shims + 2 syringes of thermal paste, 15ml Kester 951 flux and T8/T10 torx screwdrivers

9. SRA Soldering Products Rosin Paste Flux #135 In A 2 oz Jar

  • The ideal flux for electrical and electronic repairs
  • Contains 2 ounce in a “Hockey puck” Jar
  • Formulated for use with tin/lead and lead-free alloys
  • Dimensions: 2.5″ Dia x 1″ H (64 x 25.5 mm)
  • Does not need to be cleaned
  • Active temperature range: 93 – 315°c/ 200 – 600°
  • Made in USA

10. Chipquik Tack Flux no clean in a 10cc syringe w/plunger & tip – SMD291

  • Remove QFDs, PLCCs, SOICs and chip components without costly equipment
  • Use with existing rework equipment or temp controlled soldering irons
  • Special removal alloy has excellent wetting ability
  • Low melting temperature
  • Safe, affordable, easy and won’t damage sensitive components